Quick Links: Packaging Equipment | Process Equipment | Support Equipment | Categories | Manufacturers | New Equipment

SIDEL

IDItemModel 
14597SIDEL Waterfall Style Dual Belts Cap Feeder
Used SIDEL Waterfall Style Dual Belts Cap Feeder

Dual belt cap feeder set for 28mm caps. Right belt is 12"wide with 1/2"tall cleats at 1-1/2" spacing and left belt is 24"wide with 1/2"tall cleats at 1-1/4" spacing. Both belts are driven by 1hp motors. Hopper is 48"x 53-1/2" top and 30"deep to the lowest point. The hopper is equipped with a slider door on top. Stainless steel construction. 

14556SIDEL Waterfall Style Cap FeederCF2024
Used SIDEL Waterfall Style Cap Feeder

Stainless steel bin and 24" wide elevator belt with left hand discharge.  Electrical panel on right hand side of machine.  Approximately 10' high discharge elevation.  Previously used to sort approximately 38mm OD overcaps.

14545SIDEL Waterfall Style Cap Sorter With Cap Air Conveyor S
Used SIDEL Waterfall Style Cap Sorter With Cap Air Conveyor S

Currently set for 1881 28mm closures. 11' discharge elevation and 10' conveyor elevation. Conveyor includes approximately 50' of straight plus (1) 90 degree curve.

12919SIDEL Cap Elevator & Air Conveyor System
Used SIDEL Cap Elevator & Air Conveyor System

Sidel/Aidlin Waterfall cap sorter with air conveyor set on 28mm 1881 closure.

12682SIDEL Waterfall Style Cap Feeder
Used SIDEL Waterfall Style Cap Feeder

Unit sorted approximately 60mm plastic can lids. Machine was used for a brief test and was never used in full production. Discharge height: 114" with 7" adjustable leg height. Discharge is on the right side. Hopper is approx. 15 cu. ft. Cleat spacing: 2.5".  Stainless steel construction. Electrical cabinet information: PULS SL5 power supply, Allen Bradley AC drive, (1)Allen-Bradley powerflex VFD, 240V, 3 phase, 60 Hz, 30A. Overall dimensions: 142"H x 85"W x 73"L.

12681SIDEL Waterfall Style Cap FeederCF2024
Used SIDEL Waterfall Style Cap Feeder

Unit sorted approximately 60mm plastic can lids. Machine was used for a brief test and was never used in full production. 24"wide belt. Discharge height: 114" with 7" adjustable leg height. Discharge is on the right side. Hopper is approx. 15 cu. ft. Cleat spacing: 2.5".  Stainless steel construction. Electrical cabinet information: PULS SL5 power supply, Allen Bradley AC drive, (1)Allen-Bradley powerflex VFD, 240V, 3 phase, 60 Hz, 30A. Overall dimensions: 142"H x 85"W x 73"L.

11713SIDEL 6 Cavity BlowmolderSBO6-10
Used SIDEL 6 Cavity Blowmolder

6 cavity PET blowmolder with 10 station oven. Includes preform sorter and chutework. Capable of blowing from 6,000 to 12,000 bph depending on bottle capacity and specifications. Maximum neck diameter: 48.5 mm. Maximum neck height: 35 mm. Maximum preform height under neck: 145 mm. Maximum bottle diameter: 130 mm. Maximum bottle height under neck: 340 mm. Maximum base height: 51 mm

11712SIDEL 6 Cavity BlowmolderSBO6-10
Used SIDEL 6 Cavity Blowmolder

6 cavity PET blowmolder with 10 station oven. Includes preform sorter and chutework. Capable of blowing from 6,000 to 12,000 bph depending on bottle capacity and specifications. Maximum neck diameter: 48.5 mm. Maximum neck height: 35 mm. Maximum preform height under neck: 145 mm. Maximum bottle diameter: 130 mm. Maximum bottle height under neck: 340 mm. Maximum base height: 51 mm. Blowing air - dry, de-oiled and filtered up to 0.01 ppm. For spherical base, blowing air is supplied from 100 to 50 Nm^3/h at pressure up to 25 bars depending on item. For petaloid base, blowing air is supplied from 140 to 700 Nm^3/h at pressure up to 35 bar depending on item. Siemens Simatic S5-PS07A/15A controls. (1) Allen Bradley powerflex 4 VFD. Total weight: 120 daN. Installed capacity: 223 kw. Maximum intensity: 33A. Electrical: 380V/60Hz.

11625SIDEL Waterfall Style Cap FeederCF4324
Used SIDEL Waterfall Style Cap Feeder

Unit sorted approximately 60mm plastic can lids. Machine was used for a brief test and was never used in full production. Discharge height: 114" with 7" adjustable leg height. Discharge is on the right side. Hopper is approx. 15 cubic feet. Cleated belt has 2.5" between each row. Stainless steel construction. Electrical cabinet information: PULS SL5 power supply, Allen Bradley AC drive, 240V, 3 phase, 60 Hz, 30A. Overall dimensions: 142"H x 85"W x 73"L.

11624SIDEL Waterfall Style Cap FeederCF4324
Used SIDEL Waterfall Style Cap Feeder

Unit sorted approximately 60mm plastic can lids. Machine was used for a brief test and was never used in full production. Discharge height: 114" with 7" adjustable leg height. Discharge is on the right side. Hopper is approx. 15 cu. ft. Cleat spacing: 2.5".  Stainless steel construction. Electrical cabinet information: PULS SL5 power supply, Allen Bradley AC drive, (1)Allen-Bradley powerflex VFD, 240V, 3 phase, 60 Hz, 30A. Overall dimensions: 142"H x 85"W x 73"L.

11574SIDEL Preform FeederTremie A3
Used SIDEL Preform Feeder

Preform feeder hopper equipped with full level sensor. 

7411SIDEL Quick Change Shell Holders
Used SIDEL Quick Change Shell Holders

CRATE OF MOLD COMPONENTS, SIDEL QUICK CHANGE SHELL HOLDERS, PUMP STYLE. includes 10 Shell Holders. Overall Diam- 162 MMInside Diam- 117 MM Overall Height- 279.4 MM Mold Height- 254 MM

14521SIDEL 16 Cavity BlowmolderSBO 16/16 Four
Used SIDEL 16 Cavity Blowmolder

16 cavity blowmoulder rated up to 16,000 PET bottles/minute depending on bottle capacity. The linear oven has 16 heating modules and each oven module includes of 8 infrared lamps. Infrared oven brings the preforms to a temperature between 105 to 120 deg Celsius before they are drawn-blown in the finishing wheel. The electrical cabinet has approx. 69023 hours on it. Weight of blow wheel: 16000 daN(with modules). Weight of electrical cabinet: 1500 daN. Weight of linear oven: 3500 daN. Pneumatic requirements: compressed air from 7 bar to 35 bars, control air flow from 95 to 200 Nm^3/h at 7 bar pressure according to item, spherical base from 270 to 1340 Nm^3/h with pressure up to 25 bars according to item and free standing base with flow from 375 to 1750 Nm^3/h with pressure up to 35 bar according to item. Blow air has to be dry, deoiled and filtered to 0.1 ppm. Chilled water requirement: flow up to 15 m^3/h with temperature 10 to 12 deg Celsius and pressure 5 to 6 bars and up to 36000 Kcal calories to be removed. Electrical: 380 V, 60 Hz. 110V control voltage. Maximum intensity: 500 amps. Installed power: 350 KW. Includes a dehumidifier: manufacturer: Cargocaine, model: HCD-600-EA, serial: 2283, year: 1997, electrical: 460V/3ph/60Hz/23 FLA. The dehumidifier has approximately 17597 hours. 

alt logo
Search SMB