The turntable is 81" wide X 9' long, the rollers are 2.5" wide and are 3.5" seperated to their centerline and are 53" long. The motor is 1hp.
The turntable is 80" square, the rollers are 2.5" wide, they're 3" to the centerline and are 53" long with a .75hp motor.
The turntable is 78" square, the rollers are 2.5" wide and are seperated 3" to the centerline and are 74" long.
Includes (5) 4'-11" long sections at approximately a 17" elevation. Manufactured by S2F Engineering. 1hp 208-230/460V motor drives on each section mounted on the side underneath the rollers. Most rollers…
chain driven live roller pallet conveyor includes 8 - 5' powered straight sections(motor mounted on bottom), 8 - 7'9" powered straight sections(motor mounted on bottom) and 1 - 5'6" 90…
Chain driven live roller pallet conveyor with 2" rollers on 6" centers as follows:6 each 15’ conveyor with one drive 90' 1 each 10’ conveyor with one drive 10' 1 each 5’…
(1)5'long and 12'-6" long dual chains pallet conveyor with 38" spacing between chains. Top of the chain elevation: 17.5"(approx.). Individual section has a 1/2 hp, 208-230/480V, 2.1-2/1 amps, 3ph, 60Hz,…
Approx. 5'-7" diameter turntable with dual strands chains at 40.5" spacing. Table only rotates 90*
