Quick Links: Packaging Equipment | Process Equipment | Support Equipment | Categories | Manufacturers | New to Inventory

Used Labelers - Labeling Equipment

IDItemModel # Cart
11744CMS Label Shrink Tunnel
Used CMS Label Shrink Tunnel

Approx. 40" long stainless steel label shrink tunnel. Mounted on tubular frames. Equipped with 4(1/45hp) fans. Electrical: 480V/3Ph/50/60Hz. Rated current is 22 amps, main fuses is 30 amps and 26 amps FLA.

11743CMS Label Shrink Tunnel
Used CMS Label Shrink Tunnel

Approx. 40" long stainless steel label shrink tunnel. Mounted on tubular frames. Equipped with 4(1/45hp) fans. Electrical: 480V/3Ph/50/60Hz. Rated current is 22 amps, main fuses is 30 amps and 26 amps FLA.

11654KRONES 16 Station Cold Glue Rotary LabelerSolomatic
Used KRONES 16 Station Cold Glue Rotary Labeler

High speed cold glue labeler previously used to apply paper labels to front and neck and rear of 12oz beer bottles.  Allen-Bradley controls including SLC 5/02 processor and Powerflex 700 VFD.  Mild steel electrical enclosure.  Left to right (clockwise) operation.

11653KRONES 16 Station Cold Glue Rotary LabelerSolomatic
Used KRONES 16 Station Cold Glue Rotary Labeler

High speed cold glue labeler previously used to apply paper labels to front and neck and rear of 12oz beer bottles.  Allen-Bradley controls including SLC 5/02 processor and Powerflex 700 VFD.  Stainless steel electrical enclosure.  Left to right (clockwise) operation.

11626KOSME Front & Back Pressure Sensitive Rotary LabelerTOP.ADESIVE.1280.827S2.E2.C0.CE
Used KOSME Front & Back Pressure Sensitive Rotary Labeler

430 bpm Pressure sensitive labeler for plastic bottles.  Machine has ability to pressurize the empty bottle during labeling.  Bottle diameter range 40mm to 85mm, height from 120 to 350mm, label height from 15 to 180mm, label width from 20mm to 120mm for a shaped bottle or 270 degrees of bottle circumference for a round bottle. Over all dim... 88''H x 138''L x 100W.

11620PDC Sleeve LabelerR300TSER
Used PDC  Sleeve Labeler

Speed from 50 up to 300 containers per minute depending of applications and specification of products. Can run thinner gauge material 1.5 to 2 mils (40 to 50 micron) at high speed. Can be used for PETG, PVS, OPS and PLA films. Precise product handling. Run bands that are 5.62-6.31". Left to right product transport direction. Equipped with a pair of 18" long infeed screw and 2-1/2" diameter tooling piece(mandrel). Stainless steel base frame. Electrical: 480V/3Ph/20Amps.

11617INTERSLEEVE Inline Sleeve LabelerSA2100DT
Used INTERSLEEVE Inline Sleeve Labeler

Production speed is up to 220 products/minute. Right to left configuration transport direction. Sleeve material: high quality PVC. Sleeve thickness: 40 - 70 micron. Reel dimensions: core diameter 250 mm/outer diameter 600 mm. Sleeve lay flat width: 105 mm. Sleeve length: 111 mm. Pneumatic supply at 6 bar (max.). Air consumption: 250 L/minute. Operating temperature: +15 degree Celsius to +40 degree Celsius. Small footprint.

11603TRINE Roll Fed Labeler6500
Used TRINE Roll Fed Labeler

Designed for filled or empty container decoration, the model 6500 can apply a full wrap, partial wrap or spot label. Label web width from 1.0" to 6.5" and placed .06" to 8.5" to the top. High speed capability of up to 500 bpm depending upon package specifics. FIFE web tracker. Slautterback model LS 20H hotmelt glue unit. Plus 5000 series electro cam programmable limit switch. Electrical: 480V/3Ph/60Hz. Rated current: 25 amps. 

11589QUADREL Automatic Pressure Sensitive LabelerVersaline
Used QUADREL Automatic Pressure Sensitive Labeler

Single Q62 labeling head. Capable of dispensing up to 1200" label per minute. 1" Reset time. Label width up to 7". Accuracy up to +/-1/32". Maximum product height:14". Left to right configuration. 16" Diameter unwind roll. Approx. 120" long X 4-1/2" wide tabletop conveyor driven by 1/2HP Bodine Electric Co. motor. Encorder-based speed compensation. Stainless steel welded frame. Mounted on T-stand with castor wheels. Allen-Bradley Panelview 300 Micro HMI. Electrical utilities: 220V, 1Ph, 9Amps. 

11511KRONES Roll Fed Hot Glue LabelerContiroll
Used KRONES Roll Fed Hot Glue Labeler

16 station rotary roll feed hot melt glue labeler. Allen-Bradley controls with Control Logix 5555 PLC, Powerflex 70 VFD and (2) SEW Movidrive controllers. Allen-Bradley Panelview 1000. Counter-clockwise rotation. Screw infeed. Electrical: 460 V/3 Ph/60 Hz/17 amps rated current. 

11498NAFM Inline Bottle SleeverLX-150
Used NAFM Inline Bottle Sleever
The NAFM Model LX-150 is an in-line bullet (mandrel) shrink labeler for shrink labeling and tamper evident neck-banding operations. It is fully servo driven and microprocessor controlled which ensures accurate, consistent and reliable operation at speeds up to 300 CPM, while ease of operation is provided by the operator-friendly touch-screen control panel interface (HMI).As a result of the attention paid to design and manufacturing detail and the use of highly advanced servo motors, controls, sensors and PLC technology, the LX-150 is capable of reliably handling film thicknesses as thin as .035mm. This thin film capability can provide significant and continuing label material savings.Ease of operation and operational cost savings were also design considerations. The LX-150 can be rolled up to any conveyor and its sturdy Good Manufacturing Practices (GMP) design and construction provides for 24 hour operation, while its standard dual unwind system allows continued operation with only a brief splicing stop.Size change-overs are simple and quick. The label cut length can be changed electronically by utilizing the control panels touch screen interface. For different diameters, a new timing screw and bullet (mandrel) are installed while different bottle heights are accommodated by raising or lowering the machine by a turn-screw mechanism.
11497TRONICS Front & Back Pressure Sensitive Labeler
Used TRONICS Front & Back Pressure Sensitive Labeler

Speed: up to 1,200" of label per minute. Minimum label size: 0.5" X 0.5". Label width up to 9". Label placement accuracy: +/-1/32". Microprocessor Control, 7-1/2'' wide conveyor with drive and idler ends - approximately 10' long. Touch pad controls provide multiple adjustments without stopping. Touch panel has 100 job memory. Stainless steel base module. Quick changeover and label flexibility. User friendly. 

11496TRINE Pressure Sensitive Wraparound Labeler4500PS
Used TRINE Pressure Sensitive Wraparound Labeler

Web Feed w/ Fife Linear Race Offset Pivot Guide, Allen Bradley SLC 5/04 PLC, (3) Powerflex VFDs and Panel View Plus 1000 Touchscreen Interface. Vertical roll stand. Stainless steel top table. Full lexan guarding on main machine. 4 1/2" conveyor drive and idler system. Air requirement: 15 CMF at 80 psi. Electrical: 240V 60Hz 3Ph 30FLA. 

11486BENISON Steam Heat TunnelWS-130XL
Used BENISON Steam Heat Tunnel

Stainless steel construction. Tunnel mounted on tubular frame. 10' overall length. Currently set for 48" conveyor elevation. Each side of tunnel has (3) 1 1/2" square tubing headers which are adjustable in height.

11141SPEAR INC. Servo Driven Pressure Sensitive LabelerTOP. ADHESEIVE. 1280.S2T S2.E2.CO.CE.
Used SPEAR INC. Servo Driven Pressure Sensitive Labeler

Spear inc. Mason, OH., Top Adheseive labeler with 480V 60Hz electrical rating. Servo driven the machine can label a variety of bottles including cylinders ovals and squares with quick no-tool changeovers. Capable of labeling 12-oz bottles at speeds to 500 bottles/min. Equipped with Allen-Bradley PanelView plus 1000.

10757HOPPMANN Pressure Sensitive LabelerLV3LLIT857
Used HOPPMANN Pressure Sensitive Labeler

Hoppmann pressure sensitive labeler has supply roll 12"(305 mm) OD X 3"(76 mm) ID and accuracy of +/- 0.032"(0.8 mm) depending on application style. Label size ranges up to 3" X 5.25". Photo sensor label detection. Air supply requirement is 80 psi@2,2 CFM (5 bar) and operating environmental temperature ranges from 41 to 104 deg F(5 deg Celsius to 40 deg Celsius) with 20-85% non condensing relative humidity. Electrical: 115/230V,50/60hz, 6amps. OAD: 21.5"(546 mm) X 29.5"(749 mm) X 24.25"( 616 mm).

10745SCHEIDEGGER Sleeve Shrink Labeler
Used SCHEIDEGGER Sleeve Shrink Labeler
Capable sleeve shrink labeling bottle diameter ranging from 55 to 120 mm, cap diameter from 20 to 55 mm, bottle height from 80 to 350 mm depending on applications and materials. Sleeve cut length is 25 to 90 mm.
10723LSI Pressure Sensitive Labeler3161B
Used LSI Pressure Sensitive Labeler
Left hand configured pressure sensitive labeler. Label sizes up to 6" length and 4" width. Equipped with 3"diameter core and 12"diameter roll. Adjustable legs. Carbon steel construction. Mounted on the T-stand.
10720LSI Pressure Sensitive Labeler3261
Used LSI Pressure Sensitive Labeler
Left hand configured pressure sensitive labeler. Label size range up to 6" in length and 4" in width. Equipped with 3" core diameter and 12" diameter roll. Mounted on the T-stand.
10691B&H LabelerBH2300
Used B&H Labeler
Speed range from up to 350 CPM depending on containers and conditions. It can label glass, fiberboard, plastic and metal containers. Container size range: 1.25" minimum diameter to 5.06" maximum diameter. Label sizes from 4.5" minimum length to 16.40 maximum length. Conveyor height is adjustable from 36.5" to 39.0". Air consumption is 15 CFM at 80 psi. The typical temperature range for the adhesive is 200-250 degree F. Electrical: 460V/60Hz/3ph.