Quick Links: Packaging Equipment | Process Equipment | Support Equipment | Categories | Manufacturers | New Equipment

Used Case Sealers/Tapers

About Case Sealers and Tapers

Case sealers are designed to seal cases using either glue or tape, after the case (or box) has been erected and filled with product.  Case sealers can be either automatic or semi-automatic.  Semi-automatic case sealers require an operator to close the major and minor flaps of the case before the case can be sealed.  Automatic case sealers do not require the flaps to be closed before sealing.  Case sealers have an array of capabilities depending on the application the specific case sealer was designed for.  Case sealers can be random or uniform.  Uniform case sealers are designed to be manually adjusted for a specific case size and will only seal that size case until an operator adjusts the machine for a different size case. Random case sealers are designed to read and automatically adjust to the varying sizes of cases that pass through the machine.

Used Case Sealers from SMB Machinery

SMB Machinery carries an extensive inventory of quality pre-owned case sealers and tapers capable of meeting the end-of-line requirements of most packaging applications. Our current inventory of used case sealers and tapers includes semi-automatic, automatic, uniform, and random machines from reputable brand names like 3M, Little David, Elliott, and RA Pearson. Like all of our packaging and process equipment, SMB Machinery’s selection of case sealing equipment is reliable, efficient and will meet the requirements of your manufacturing operation. Purchasing a pre-owned case sealer from SMB Machinery is a time-saving, reliable, and economical investment. 

 

IDItemModel # Cart
14285MARQ Top Case Taper with Dekka HeadHPA-T-SBD/RH/
Used MARQ Top Case Taper with Dekka Head

Capable up to 30 cases/minute, but varies depending on case length. Case sizes: 8" - 22" in length, 6" - 20" in width and 5" - 19" in height. 2" tape head. Side belt drive. Right hand control panel. Handcrank for adjustment. Electrical: 110V, 15 FLA, 1 phase, 60 Hz. Largest motor: 3/4 hp, 10.4 amps. Air requirement: 6 cfm, 80 psig maximum at maximum cycle rate. Overall dimensions: 6'-7"L x 4'-5"W x 4'-8"H.

14270WEXXAR Tape Case Top SealerWST-07
Used WEXXAR Tape Case Top Sealer

Closes and seals only the top flaps. RSC(regular slotted container) style cases. Cases/minute depends on the case length and the stop gate timer setting located inside the electrical panel. Rugged construction, safety guards. Allen-Bradley MicroLogix 1000, Allen-Bradley 160 vfd. Electrical: 460V/3ph/60Hz/2.1 FLA. Largest motor: 1/3 hp with 0.8 amps. 

14002COMBI AMERICA Case SealerTBS100FC
Used COMBI AMERICA Case Sealer

Electrical: 480V/3ph/60Hz/3 amps.

12846ABC PACKAGING Refurbished Top Case Sealer30HM
Used ABC PACKAGING Refurbished Top Case Sealer

Stainless steel frame with full lexan guarding. Includes Nordson 2302 glue unit. Case size range: 8" to 24" in length, 6" to 16" in width and 4-1/2" to 18" in height. Powered case feed. Chain-mounted flight lugs square cases throughout transfer. Powered tucker positively folds inner flaps to ensure smooth outer flap closing. Electrical: 480V/3Ph/60Hz/10 FLA. Overall dimensions: approx. 127-1/2"L x 71-1/2"W x 64"H.  Machine has been refurbished.

12834ELLIOTT Hot Glue Case SealerHMT-MINI
Used ELLIOTT Hot Glue Case Sealer

Capable up to 25 cases/minute depending on case length and applications. Case size range: 8" to 18" in length, 6" to 16" in width and 3" to 16" in height. Nordson 3500 hot melt glue unit with 3 hoses with glue heads. Includes flap tucker. Allen-Bradley 1791-16AC. Electrical: 480V/3Ph/60Hz/15 amps. 

12739ELLIOTT Case SealerHMT MINI
Used ELLIOTT Case Sealer

Trailing flap closer (glue applicator has been removed). Capable up to 25 cases/minute. Case size range: 8" to 18" in length, 6" to 16" in width and 3" to 16" in height.   Includes Nordson 3000 series hot melt glue unit

124803M Case Taper200a(Type: 39600)
Used 3M Case Taper

Top and bottom taper. Accuglide 2+ taping head. Electrical: 115V, 60HZ, 1.9 amps, 220 Watts.

12369WEXXAR Case SealerWSH 06
Used WEXXAR Case Sealer

Automatic case erector capable up to 20 cases/minute depending on case size and applications. Case sizes: 10"L x 6"W x 5"H min., 20"L x 18"W x 20"H max. Heavy duty side drive belt transport. Small footprint. Interlocked safety guarding. Electrical: 460V-3Ph-60Hz-24.1 Amps.

12354LOVESHAW/PADLOCKER Top Case SealerLD7D
Used LOVESHAW/PADLOCKER Top Case Sealer

Speed depends on case size and operator dexterity. Belt speed up to 80 fpm. Case size: 4-1/2" to any length, 4-1/2" to 22" width, 4-1/2" to 24" height. Small footprint. Infeed elevation: 26-1/2". Electrical requirements: 240V/1ph/50Hz/3.3amps. 1/3 hp motor. Mounted on roller casters. Lastly running 3" wide tape. 

12353LOVESHAW/PADLOCKER Top Case SealerLD7D
Used LOVESHAW/PADLOCKER Top Case Sealer

Speed depends on case size and operator dexterity. Belt speed up to 80 fpm. Case size: 4-1/2" to any length, 4-1/2" to 22" width, 4-1/2" to 24" height. Small footprint. Infeed elevation: 31-1/2". Electrical requirements: 240V/1ph/50Hz/3.3amps. 1/3 hp motor. Mounted on roller casters. Missing tape head.

12029ABC PACKAGING Automatic Top and Bottom Hot Melt Case Sealer30A
Used ABC PACKAGING Automatic Top and Bottom Hot Melt Case Sealer

A-B-C Packaging Machine Corp Model 30A Automatic Top and Bottom Hot Melt Case Sealer. Capable of speeds up from 5 to 50 cases per minute. Has a case size range: length 8" to 24", width 6" to 16", height 4-1/2" to 18". Has a Nordson hot melt glue system. Mitsubisihi MELSEC PLC controls. 3/60/230/460V, 60 psi. Has stainless steel frame and Lexan guarding.

12006KLIPPENSTEIN Top and Bottom Case SealerK600HM
Used KLIPPENSTEIN Top and Bottom Case Sealer

Designed and engineered for closing and sealing top & bottom flaps of RSC or FOL Cases containing pliable or rigid products. This is a heavy-duty full length model, which has its own indexing conveyor to ensure correct positioning of the box in the flap tucking and adhesive application section. Up to 40 CPM performance. Powder coated finish and zinc plating on all wear surfaces. Chain driven flight bar for reliable case advance operation. Fully enclosed safety shields to prevent human contact during operation.Standard Case Range:Minimum: 8″L x 6″W x 5″H Maximum: 24″l x 18″W x 18″H. Electrical: 480V/3ph/60Hz/30 Amps.

12005KLIPPENSTEIN Top and Bottom Case SealerK600HM
Used KLIPPENSTEIN Top and Bottom Case Sealer

Designed and engineered for closing and sealing top & bottom flaps of RSC or FOL Cases containing pliable or rigid products.  This is a heavy-duty full length model, which has its own indexing conveyor to ensure correct positioning of the box in the flap tucking and adhesive application section.  Up to 40 CPM performance. Powder coated finish and zinc plating on all wear surfaces.  Chain driven flight bar for reliable case advance operation.  Fully enclosed safety shields to prevent human contact during operation. Standard Case Range: Minimum: 8″L x 6″W x 5″H Maximum: 24″l x 18″W x 18″H. Electrical: 480V/3ph/60Hz/30 Amps.

12004KLIPPENSTEIN Top and Bottom Case SealerK600
Used KLIPPENSTEIN Top and Bottom Case Sealer

Designed and engineered for closing and sealing top & bottom flaps of RSC or FOL Cases containing pliable or rigid products.  This is a heavy-duty full length model, which has its own indexing conveyor to ensure correct positioning of the box in the flap tucking and adhesive application section.  Up to 40 CPM performance. Powder coated finish and zinc plating on all wear surfaces.  Chain driven flight bar for reliable case advance operation.  Fully enclosed safety shields to prevent human contact during operation. Standard Case Range: Minimum: 8″L x 6″W x 5″H Maximum: 24″l x 18″W x 18″H.Electrical: 480V/3ph/60Hz/20 Amps. 

117303M Top Case Taper200A
Used 3M Top Case Taper

Capable up to 30 boxes per minute depending on box length. Box size range from 6" to no limit in length, 6" to 21.5"in width and 4.75" to 24.5" in height. Tape width can vary from approx. 1.5" to 2". Machine can be adjusted for box height and width. Electrical: 115 V/1.9 A/60 Hz/220 W.

117293M Top Case Taper200A
Used 3M Top Case Taper

Capable up to 30 boxes per minute depending on box length. Box size range from 6" to no limit in length, 6" to 21.5"in width and 4.75" to 24.5" in height. Tape width can vary from approx. 1.5" to 2". Machine can be adjusted for box height and width. Electrical: 115 V/1.9 A/60 Hz/220 W.

11588LITTLE DAVID Case Taper
Used LITTLE DAVID Case Taper

Top tape head. Adjustable height and width for different size cases. Case size: 8" to 24" in length, 5" to 18" in width, 5" to 18" in height. Tape width: 1-1/2" to 2". Electrical: 220V/1.6amps/3Ph/60Hz. Line air pressure: 65 psi min. 

11585LITTLE DAVID Case Taper14B
Used LITTLE DAVID Case Taper

Top and bottom tape heads. Capable up to 14 cases per minute depending on case dimension. Height and width for different size cases can be adjusted manually. Case size: 8" to 24" in length, 5" to 18" in width, 5" to 18" in height. Tape width: 1-1/2" to 2". Electrical: 220V/10amps/1ph/60hz. Overall dimensions: 58"W x 98"L x 95"H

11558ABC PACKAGING Hot Glue Case Sealer36
Used ABC PACKAGING Hot Glue Case Sealer

Hot melt case sealer with Slautterback KB20 glue unit. Machine has flap control with flap tucker. Slautterback DC driver. Case size range from 10" to 22" in length, 6" to 17" in width and 4" to 17"in height. Air requirements: 75 to 120 PSI- main supply, usage is 0.024 cubic ft. at 50 psi free air per cycle. Electrical: 230/460V 3Ph 60Hz.

115453M Top and Bottom Taper200A (3M-Matic) Type 19000
Used 3M Top and Bottom Taper

Bottom feed top and bottom case taper. Speed up to 30 cases per minute depending on case length. Case sizes:  6" to no limit in length, 6" to 21.5" in width and 4.75" to 24.5" in height. Height and width are adjustable. Electrical: 115V/60Hz/1.9amps/220Watts.

alt logo
Search SMB