|
LABELERS (SLEEVE)
| ID | Item | Model |
|---|
|
6532
|
BAUTZ ENGINEERING 3-Zone Electric Sleeving Shrink Tunnel
|
3 Tunnel
|
 |
| Triple tunnel system with (3) 74" long heat tunnels. Each tunnel includes (4) set of air knives with adjustable direction. Includes stainless steel NEMA 4 remote electrical enclosure with Allen-Bradley Control Logix 5561 processor. System rated for approximately 600 bpm depending upon shrinking requirements. |
|
|
6120
|
PDC Bottle Sleever
|
F-200
|
 |
| This machine is set up to band a height of 28-35mm. It was desingned to run band widths of 150mm- 190mm, but with change parts being purchased the machine has the capabilites of running a band width as little as 100mm up to 250mm. This machine can band at speeds up to 150 band per minute, and is an 2hp machine rated for 40 amps. |
|
|
5967
|
PDC Bottle Sleeve Label system
|
75-ERL
|
 |
| Includes shrink tunnel and Model UW-20 unwind station.
All stainless steel construction.
Designed for high-speed tamper evident banding at up to 400cpm, and full sleeving applications at 300 cpm dependent upon sleeve dimensions. Using PDC’s patented Tetrahedron Wedge technology, the 75-Series is an extremely consistent and dependable system that positively handles sleeving material through the feeding, cutting and application process.
This technology is extremely robust, providing highly efficient operation,
shift after shift, year after year.
Tamper Evident Banding
Band Diameter Range . . 375 to 3.5 inches (10 to 90 mm)
Band Height Range . 625 to 9 inches (15 to 225 mm)
Line Speed . 200 to 400 cpm
Shrinksleeve Labeling
Band Diameter Range . .375 to 3.5 inches (10 to 90 mm)
Band Height Range . . 625 to 9 inches (15 to 225 mm)
Line Speed – Sleeving . 50 to 300 cpm
Line speeds vary depending on sleeve diameter and height.
Maximum bottle diameter - 2.9"
Maximum bottle height - up to 10" |
|
|
3282
|
B&H Label Shrinking Heat Tunnel
|
BH700
|
 |
| With an ever-expanding array of shrinkable label materials, the BH700 is able to support labeling of a wide variety of shaped containers, from innovative contour profiles to necked-in aerosol cans. The system handles metal, glass, plastic and fiberboard containers ranging in size from 2 to 3.5 inches (50.8 to 88.9 mm) in diameter. Operating at 500 containers per minute, the BH700 shrink system interfaces with any roll-fed labeler
Stainless steel construction. Includes electrical control enclosure. Includes 4 1/2" stainless steel tabletop conveyor through machine. 100 amp electrical service. Min 2" max 5" diameter. Open top - max height 12".
Features
General Features
HOT AIR GUNS:6 directional units with individual temperature controls; fully adjustable position
TURBINE AIR BLOWER:air supply for hot air
AIR REGULATOR:controls air supply for hot air guns
CONVEYOR:straight configuration, with stainless steel table top chain
CONVEYOR DRIVE:variable speed, with heavy-duty belt designed for long-life
CONTROL STATION:centralized design for easy operation
GUARDING:main frame, stainless steel
LUBRICATION:centralized, manual
PROGRAMMABLE HEAT CONTROLLER:individual unit temperature control, with digital display
AUTOMATIC SAFETY CONTROL:shuts heaters down when no air flow is detected and/or main drive stops
CONTAINER HANDLING FEATURES
CONTAINER ROTATION:adjustable speed for a consistent shrink; independent of conveyor speed
CONTAINER LINEAR SPEED CONTROLS:varies linear speed; independent of rotational speed
AUTOMATIC LINE SPEED CONTROLS:changes machine speed based on container supply at infeed and discharge |
|
| 4 records returned |
|
