Fillers - Filling Equipment

CSD - Counterpressure FillersCup Fillers - Positive DisplacementGravity Fillers (Liquid)
Hot Fill (Juice and Energy Drink) FillersPiston FillersPositive Displacement Fillers
Pressure Gravity Fillers (Liquid)Tank & Tote Fillers

 

IDItemModel # 
10158CROWN 45 Valve Filler & 9 Head Arol Capper45-9
Used CROWN 45 Valve Filler & 9 Head Arol Capper
Crown/ Bevcorp 45-Valve PET Bottle Filler with 9 head Arol capper, with 12 Oz, 1, 2, and 3 Liter Change Parts. Set Up For 28 and 38 MM Caps, with Allen-Bradley PanelView 1000 Controller, Logix L32E PLC and Nitrogen and CO2 Injection, and PowerFlex VFDs. The 2007 (9) head Arol capper, model EUROPK, is set up for 28 and 38 mm caps. Comes with PET Filler and Capper Parts, with Bushings, Seals, Chuck Parts, Etc.Includes setup for neck handling ($100,000 upgrade), 9 head capper turret ability ($100,000 upgrade) and 9 head turret ($125,000 upgrade). The neck handling upgrade allows changeovers in as short as 15 minutes.
10102AUTOPROD Single Lane Servo Cup Filler with SealingAP
Used AUTOPROD Single Lane Servo Cup Filler with Sealing
Autoprod Single Lane Servo Driven Cup Filler. Unit consists of cup denester, piston fill station, roll stock heat sealer w/ die cutter, does not have an overcapper on it currently.
10101 Positive Displacement Pump Filler
Used  Positive Displacement Pump Filler
4-1.5'' Outlets.
10089SIMONAZZI 72 Valve Bottle Filler with Alcoa Capper
Used SIMONAZZI 72 Valve Bottle Filler with Alcoa Capper
Simonazzi 72 valve Bottle Filler with 18 head Alcoa Capper. Both the filler and capper have been completely rebuilt mechanically and electrically. See attached PDF for a list of new parts installed and additional photos. Can run 20 oz PET bottles at 550 - 575 bottles per minute of carbonated soft drinks not exceeding 4.1 volumes of CO2 and dissolved oxygen content of less than 1 PPM. Can run 20oz PET bottles of water at speeds over 600 BPM. Based on 46 active valves and 26 inactive valves, it can run 2 liter PET bottles at 265 - 290 bottles per minute of carbonated soft drinks not exceeding 4.1 volumes of CO2 and dissolved oxygen content of less than 1 PPM.
10086ODEN CORP Positive Displacement Pump FillerPF-3K PM
Used ODEN CORP Positive Displacement Pump Filler
3/4 HP PD Pump. Waukesha Size 15 pump. PRODUCT APPLICATIONS Applications include free flowing to very viscous, chunky, particulated and abrasive products. Fill volumes from 15 mL to 55 gallons at flow rates to 30 GPM. Accuracies to 0.10% dependent upon dose size and product.
10085 Positive Displacement Pump Filler
Used  Positive Displacement Pump Filler
positive displacement pump filler with SS hopper and stainless steel construction. Frame is mounted on caster.
9930CROWN 45 Valve Bottle Filler with 6 head capper45-6
Used CROWN 45 Valve Bottle Filler with 6 head capper
45 valve filler with 6 head alcoa cap in head capper converted in 2007 to 1881 closure
9908H&K 96 Valve Filler and 16 head Capper96-16
Used H&K 96 Valve Filler and 16 head Capper
96 valve filler with a 1.0L pitch. Includes Alcoa 16 head cap-in-head capper set for the 1881 cap finish with CSI XT6 headsets. Filler ran various single serve sizes. Includes modern stainless steel and lexan guarding system.
9814AUTOPROD 2 Wide x 2 Across Servo Driven Cup Filler4X20 MS
Used AUTOPROD 2 Wide x 2 Across Servo Driven Cup Filler
Machine denests cups into dies, fills, heat seals and discharges cups into collated pattern. Was last running a PP cup # 684KS-1-17 with die cut foil lids
9812MODERN PACKAGING Rotary Cup FillerMR-8DC
Used MODERN PACKAGING Rotary Cup Filler
Rotary cup filler previously used to fill 4 oz pudding cups approximately 3" in diameter. Machine also applies foil sealed lid. Used less than 30 days and is like new. Allen-Bradley controls including Micrologix 1500 PLC and Panelview 600.
9770PNEUMATIC SCALE 40 head Pneumaflow level sensing FillerPneumaflow 40
Used PNEUMATIC SCALE 40 head Pneumaflow level sensing Filler
Used-Pneumatic Scale 40 head Pneumaflow level sensing filler. Last running 24 oz and 32 oz trigger spray bottles of a liquid fertilizer.
9692 20 Head Inline Filler
Used  20 Head Inline Filler
Riada 20 head inline Diaphram Pump Filler. The Riada will not fill under pressure. Uncarbonated liquids only. Conveyor belt width: 3.5".
9607CROWN 60 Valve CSD Filler With Alcoa 12 Head Capper60-12
Used CROWN 60 Valve CSD Filler With Alcoa 12 Head Capper
60 valve quart pitch filler. Last running 20oz through 12oz bottles at speeds up to 600 bpm. Capable of running bottles 2" to 3 7/8" in diameter x 6 1/2" to 13 1/2" tall. Includes dual level infeed screw for enhanced bottle handling performance. Motorized bowl height adjustment. 15 to 20 cfm air required at 75 to 100 psig. Bottle sizes: 6 oz. to 1 liter. It can be converted to handle 1/2 gal & 2 liter.
9595FOGG 56 Valve Water Filler With 20 Head CapperFAA5620
Used FOGG 56 Valve Water Filler With 20 Head Capper
56 valve rotary left to right flow gravity filler previously used to fill water bottles with a 28mm finish. Machine was fully overhauled by Fogg and not run on a production basis since then. 3.75" pitch.
9538CROWN 72 Valve Can Filler72 FT 99
Used CROWN 72 Valve Can Filler
Crown 72 valve can filler with 115 degree infeed and set for 202 can ends and a 211 body diameter. Servi-Tech single snift valves. (Installed on common base with Angelus 120L Seamer - SMB ID#9539). The 72-valve can filler has a rated speed up to 1000 12 oz. cans per minute with an Angelus 120L,Continental 649 and 751, or other suitable seamer.
9505FOGG 44 Valve Gravity Water Filler44 head filler
Used FOGG 44 Valve Gravity Water Filler
44 valve filler and 18 head rotary capper. Includes Hoppmann FT/40RD sorter. Currently set for 26.7mm short cap. Filler has been converted to neck handling. 400 bpm on 0.5L. Right to left bottle flow (counter-clockwise filler bowl rotation). Valves are on 5" pitch.
9498MEYER 50 Valve CSD Filler with 10 Head Plastic Capper50-10
Used MEYER 50 Valve CSD Filler with 10 Head Plastic Capper
50 valve filler/capper currently set for 28mm plastic 1810 closures but machine includes capping heads for aluminum (ROPP) closures. Machine was rebuilt by World Packaging shortly before removal.
9262H&K 72 Valve large pitch bottle fillerDeltaflow 600
Used H&K 72 Valve large pitch bottle filler
H&K 72 valve filler with 12 head Zalkin screw capper. Machine last running 1L @ 375 bpm, 2L @ 250bpm and 3L @ 140bpm. Currently setup for 2L 28mm. Hi-Speed combi style valves with quick change-over parts. Valve pitch is 5 1/8" or 130mm.
9186FOGG 15-5 Filler/Capper
Used FOGG 15-5 Filler/Capper
This is a 15 Head Filler and 5 Head Capper. Comes with enclosure and heppa filter housing. This filling machine is capable of running up to 150-160 bottles per minute.
9144CROWN 72 Valve Can FillerGF-GF-72-F.T.C.-UB-1091
Used CROWN 72 Valve Can Filler
72 valve can filler set for 202 ends. Includes recently purchased Adcor tipless valves. 2 pallet of parts.